Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    SC252

View Manufacturers View Models

Additional Info

KEY FEATURES

-Equipped with a 27 hp (20.1 kW) Kohler diesel engine on a narrow 89 cm footprint, the Vermeer SC252 brings power to backyard stumps.

-The Vermeer SC252 also features the Yellow Jacket Cutter System, engineered to provide faster, easier serviceability, as well as extend pocket and tooth life.

-The SC252 optional hydraulic front steer features an oscillating axle for mobility, specially designed steering for tighter turns, an easily accessible single-lever control, and hardened steel pivot pins and bushings.

GENERAL
-Length: 115" (292.1 cm)
-Width: 35" (88.9 cm)
-Height: 53" (134.62 cm)
-Overall Height Transport: 53" (134.62 cm)
-Weight - Engine Option One: 1040 lbs (471.74 kg)
-Weight With Dual Wheel Option (Additional): 14.5 lbs (6.53 kg)
-Width with Dual Wheel Option (Additional): 49.5" (125.73 cm)
-Sound Power: 103 dB(a)

ENGINE OPTION ONE
-Make and Model: Kohler Command
-Number of Cylinders: 2
-Gross Horsepower (Maximum): 27 hp (20.13 kw)
-Torque (Max): 42.7 ft-lb (58.07 Nm)
-Fuel Tank Capacity: 6 gal (22.71 L)
-Max Fuel Consumption: 2.4 gph (9.08 lph)
-Fuel Type: Gas
-Air Cleaner: Dry type safety element and restriction indicator
-Oil Filter: Spin on
-Recommended Oil: 10W30 Kohler
-Oil Volume with Filter 2 qt (1.89 L)
-Maximum Angle of Continuous Operation: 21 deg
-Cooling Medium: Air
-Clutch Type: Electric clutch with brake

CUTTERWHEEL SYSTEM
-Cutterwheel Diameter without Teeth: 16" (40.64 cm)
-Cutterwheel Thickness: 0.5" (1.27 cm)
-Cutterwheel Speed: 1300 rpm
-Cutterwheel Straight Line Dimension: 39" (99.06 cm)
-Cutterwheel Cut Above Ground: 25" (63.5 cm)
-Cutterwheel Cut Below Ground: 13" (33.02 cm)
-Tooth Description: Yellow Jacket Cutting System
-Number of Teeth: 16
-Number of Indexes: 2
-Number of Pockets: 16
-Reversible Pockets: 16
-Cutterwheel Guard: Standard
-Chip Containment: 7.7 cu ft (0.23 cu m)

CUTTERWHEEL DRIVE COMPONENTS
-Belt Type: Dual "A" Section
-Number of Primary Belts: 1
-Jackshaft Dimension: 1.5
-Jackshaft Bearing Type: Pillow block
-Bearing Dimensions: 1.25" (3.18 cm)
-Number of Secondary Belts: 1
-Cutterwheel Shaft: 1.5

HYDRAULIC SYSTEM
-Tank capacity: 2.8 gal (10.61 L)
-Recommended Oil Type: Vermeer VMF
-System Type: Open
-Filtration Method: 6 micron, full flow return; suction strainer
-Pump Flow at Maximum RPM: 3 gpm (11.36 L/min)
-System relief pressure: 1500 psi (103.42 bar)
-Flow Control: Standard
-Directional Control: Yes
-Oil Cooler: Yes

ELECTRICAL SYSTEM
-System Voltage: 12
-Battery: 405
-Standard Gauges: Hourmeter
-Warning Lights: Clutch and operator presence
-Switches: Clutch
-Controller: Vermeer ACS
-Shutdown System: Low engine oil pressure shutdown

CHASSIS
-Frame Description: 3" x 3 " x 3/16 " (7.62 cm x 7.62 cm x 0.48 cm)
-Boom: 4" x 4 " x 3/16" (10.16 cm x 10.16 cm x 0.48 cm)
-Control Station Description: Fixed
-Toolbox Description: Standard
-Hitch Type: Adaptor for TLR-22, 25
-Steerable Axle Type: Manual
-Tires - Option One: 5.70-8, optional duals
-Tires - Standard: 5.7x8
-Tires - Floatation: 5.7x8 duals

OTHER OPTIONS
-Special Paint Optional

OPERATOR PRESENCE SYSTEM
-Visual Interface: Dual indicator lights for operator hand contact and cutterwheel engaged

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x