Dës Säit gouf iwwersat iwwer Google iwwersetzt

Ausrüstungspezifikatioun Bibliothéik

Basismodell Informatiounen

  • Fabrikant:
    Ditch Witch
  • Modell:
    JT2020 Mach 1
  • Ausrüstung Gréisst:
    10,001 - 20,000 lbs pullback

dem Produzenten kucken Modellen kucken zréck op d 'Lëscht

Spezifikatiounen

Rod Carrying Capacity 400'
Max Spindle Torque 2200 FT-LB
Type POWER PIPE
Entry Angle 10 - 14 degrees
Max Spindle Speed 150 RPM
Length 120 IN 304.8 centimeters
Width 50.5 in 1.2827 meters
Make and Model Cummins B3.3
Min Bore Diameter 4 IN 10.16 centimeters
Joint Diameter 2.63 IN 6.6802 centimeters
Number of Cylinders 4
Weight LINED: 67 LB 30.39068879 kg
Length 203 in 5.1562 meters
Displacement 199 cubic inches
Min Bend Radius 130 FT
Engine Engine: Cummins B3.3
Ground Drive Speed FORWARD: 3.0 MPH
Height 78 in 1.9812 meters
Torque 2200 ft/lb, 150 rpm spindle speed 2983 Nm, 150 rpm spindle speed
Thrust 17,000 lb 75.6kN
Max Flow 30 GPM
Pump Output Maximum flow rate 30 gpm
Max Pressure 1500 PSI 103 bar
Pullback 20,000 lb 90 kN
Weight 10,800 lb 4 898.7976 kilograms
Fuel Type Diesel
Fuel Tank Capacity 30 GAL 113.562 40 liters
Manufacturer's Gross HP Rating 83 HP
Hydraulic Tank Capacity 17 GAL 64.3520003 liters
Rated Engine RPM 2400 RPM
Pipe Diameter 2.06 IN 5.2324 centimeters

Zousätzlech Informatioun

DIMENSION
OVERALL LENGTH: 203 IN
OVERALL WIDTH: 51.5 IN
OVERALL HEIGHT: 78 IN
RACK CAPACITY 400'
DRILLING UNIT OPERATING MASS: 10,800 LB
ENTRY ANGLE: 10 - 14 degrees
ANGLE OF APPROACH: 18 degrees
ANGLE OF DEPARTURE: 18 degrees

POWER PIPE
LENGTH, NOMINAL: 120 IN
DIAMETER: 2.06 IN
DIAMETER, TOOL JOINT END: 2.63 IN
BEND RADIUS, MINIMUM: 130 FT
WEIGHT (LINED: 67 LB

OPERATION
SPINDLE SPEED, MAXIMUM: 150 RPM
SPINDLE TORQUE, MAXIMUM: 2200 FT-LB
CARRIAGE THRUST TRAVEL SPEED: 140 FPM
CARRIAGE PULLBACK TRAVEL SPEED: 140 FPM
THRUST FORCE: 17,000 LB
PULLBACK FORCE: 20,000 LB
BORE DIAMETER: 4 IN
BACKREAM DIAMETER (SOIL DEPENDENT): variable
GROUND TRAVEL SPEED, MAXIMUM*
FORWARD: 3.0 MPH
REVERSE: 3.0 MPH

POWER
ENGINE: Cummins B3.3
FUEL: Diesel
COOLING MEDIUM: Liquid
INJECTION: Direct
ASPIRATION: Turbocharged
CYLINDERS: 4
DISPLACEMENT: 199 cubic inches
BORE: 3.74 IN
STROKE: 4.53 IN
MANUFACTURER’S GROSS POWER RATING: 83 HP
RATED SPEED: 2400 RPM

DRILLING FLUID SYSTEM (ON-BOARD)
DRILLING FLUID PRESSURE, MAXIMUM: 1500 PSI
DRILLING FLUID FLOW, MAXIMUM: 30 GPM

FLUID CAPACITIES
HYDRAULIC RESERVOIR: 17 GAL
FUEL TANK: 30 GAL

BATTERY
SAE RESERVE CAPACITY RATING: 195 minutes
SAE COLD CRANK RATING @ 0° F (-18° C): 950 amps

dem Produzenten kucken Modellen kucken zréck op d 'Lëscht

Dës Informatioun gëtt nëmmen fir informell Zwecker zur Verfügung gestellt. HDD Broker LLC kann net garantéieren d'Genauegkeet oder Vollständegkeet vun dësen Informatiounen. Dës Informatioun kann mam Wënzer änneren. Verschidde Spezifikatioune kënnen tëschent dem Modelljoer variéieren.

HDD Broker benotzt Cookien an sammelt perséinlech Informatioune fir seng Websäiten.

Fir méi ze léieren, préifen d'HDD Broker d'Privatsphärpolitik an d'Cookie-Politik. Wann Dir op "I Accept" klickt, kënnt Dir uginn datt Dir Är Browserinstellungen ugepasst hutt fir Är Präferenzen anzestellen an d'Cookie vum HDD Broker ze benotzen.

x