Dës Säit gouf iwwersat iwwer Google iwwersetzt

Ausrüstungspezifikatioun Bibliothéik

Basismodell Informatiounen

  • Fabrikant:
    Ditch Witch
  • Modell:
    JT2720 Mach 1
  • Ausrüstung Gréisst:
    20,001 - 30,000 lbs pullback

dem Produzenten kucken Modellen kucken

Spezifikatiounen

Fuel Type Diesel
Ground Drive Speed Forward: 0-1.7 mph Forward: (0-2.7 kmh)
Weight 90 lbs (41 kg)
Pullback 27,000 lbs (120 Kn)
Length 248" (6.30 m)
Manufacturer's Gross HP Rating 125 HP (93 kw)
Max Flow 47 gpm (178 L/Min)
Weight of Pipe and Large Box 5,000 lbs (2,270 kg)
Weight Operating Mass: 20,900 lbs Operating Mass: (9,480 kg)
Width 81" (2.06 m)
Number of Cylinders 4
Max Pressure 1,500 psi (103 bar)
Weight of Pipe and Small Box 2,500 lbs (1,130 kg)
Min Bore Diameter 4.5" (114 mm)
Thrust 24,800 lbs (110 Kn)
Fuel Tank Capacity 40 gal (151 L)
Height 93" (2.36 m)
Entry Angle 10-16º
Hydraulic Tank Capacity 36 gal (136 L)
Engine John Deere 4045TF250
Make and Model John Deere 4045TF250
Type POWER PIPE
Torque 3200 FT-LB
Displacement 276 in3 (4.5 L)
Length 118" (3 m)
Max Speed 2,400 RPM
Pipe Diameter 2.38" (60 mm)
Max Spindle Torque 3,200 ft/lbs (4,300 Nm)
Min Bend Radius 175' (53 m)
Max Spindle Speed Inner Rod: 225 rpm
Joint Inside Diameter 3" (76 mm)

Zousätzlech Informatioun

DIMENSIONS
Overall Machine Length: 248" (6.30 m)
Overall Machine Width: 81" (2.06 m)
Overall Machine Height: 93" (2.36 m)
Drilling Unit Operating Mass: 20,900 lbs (9,480 kg)
Entry Angle: 10-16º
Angle of Approach: 22º
Angle of Departure: 26º

JT/MACH 1 POWER PIPE
Length of Drill Pipe (Nominal): 118" (3 m)
Diameter of Drill Pipe Tool Joint End: 3" (76 mm)
Diameter of Drill Pipe: 2.38" (60 mm)
Minimum Bend Radius: 175' (53 m)
Weight of Drill Pipe: 90 lbs (41 kg)
Weight of Drill Pipe -
Large Pipe Box (with 50 pipes): 5,000 lbs (2,270 kg)
Small Pipe Box (with 25 pipes): 2,500 lbs (1,130 kg)

OPERATION
Maximum Spindle Speed -
Inner Rod: 225 rpm
Maximum Spindle Torque: 3,200 ft/lbs (4,300 Nm)
Carriage Thrust Travel Speed: 120 fpm (37 m/min)
Carriage Pullback Travel Speed: 120 fpm (37 m/min)
Thrust Actual, in JT Mode: 24,800 lbs (110 Kn)
Pullback Actual: 27,000 lbs (120 Kn)
JT Minimum Bore Diameter (with soil bit): 4.5" (114 mm)
Backream Diameter (soil dependent): variable
Ground Travel Speed -
Forward: 0-1.7 mph (0-2.7 kmh)
Reverse: 0-1.7 mph (0-2.7 kmh)

POWER
Engine: John Deere 4045TF250
Fuel: Diesel
Cooling Medium: Liquid
Injection: Direct
Aspiration: Turbocharged and Charge Air Cooled
Number of Cylinders: 4
Displacement: 276 in3 (4.5 L)
Bore: 4.19" (106 mm)
Stroke: 5" (127 mm)
Manufacturer's Gross Power Rating: 125 HP (93 kw)
Rated Speed: 2,400 RPM

DRILLING FLUID SYSTEM (ONBOARD)
Maximum Drilling Fluid Pressure: 1,500 psi (103 bar)
Maximum Drilling Fluid Flow: 47 gpm (178 L/Min)

FLUID CAPACITIES
Hydraulic Reservoir: 36 gal (136 L)
Fuel Tank: 40 gal (151 L)

BATTERY (2 USED)
SAE Reserve Capacity Rating: 195 min
SAE Cold Crank Rating @ 0º F (-18º C): 950 amps

dem Produzenten kucken Modellen kucken

Dës Informatioun gëtt nëmmen fir informell Zwecker zur Verfügung gestellt. HDD Broker LLC kann net garantéieren d'Genauegkeet oder Vollständegkeet vun dësen Informatiounen. Dës Informatioun kann mam Wënzer änneren. Verschidde Spezifikatioune kënnen tëschent dem Modelljoer variéieren.

HDD Broker benotzt Cookien an sammelt perséinlech Informatioune fir seng Websäiten.

Fir méi ze léieren, préifen d'HDD Broker d'Privatsphärpolitik an d'Cookie-Politik. Wann Dir op "I Accept" klickt, kënnt Dir uginn datt Dir Är Browserinstellungen ugepasst hutt fir Är Präferenzen anzestellen an d'Cookie vum HDD Broker ze benotzen.

x