Dës Säit gouf iwwersat iwwer Google iwwersetzt
Ausrüstungspezifikatioun Bibliothéik
Basismodell Informatiounen
-
Fabrikant:Vermeer
-
Modell:D220x300 S3
-
Ausrüstung Gréisst:200,000 lbs pullback and over
dem Produzenten kucken Modellen kucken
Spezifikatiounen
Zousätzlech Informatioun
GENERAL DIMENSIONS AND WEIGHTS
Min transport length: 37' (11.3 m)
Min transport width: 100" (254 cm)
Min transport height: 11.3' (3.4 m)
Weight: 74,000 lb (33,565.84 kg)
ENGINE
Make/Model: CAT C13 ACERT Tier 4 Final
Fuel type: Ultra-low sulfur diesel
Max engine rpm: 2150 rpm
Gross horsepower: 415 hp (309 kW)
Cooling method: Liquid
Aspiration: Turbocharged and after-cooled
Emissions rating: Tier 4 Final (EU Stage IV)
OPERATIONAL
Thrust/Pullback: 242,100 lb (1076.9 kN)
Max carriage speed at max engine rpm: 120 fpm (36.6 m/min)
Max spindle torque (low at max engine rpm): 30,750 ft-lb (41,691.4 Nm)
Max spindle speed at max engine rpm: 164 rpm
Max ground drive speed at max engine rpm: 1.8 mph (2.9 km/h)
Noise level at operator’s ear: 85 dB(A)
Drill rack angle: 10°-17° (17.6%-30.6%)
FLUID CAPACITIES
Fuel tank: 134 gal (507.2 L)
Hydraulic tank: 166 gal (628.4 L)
DRILLING FLUID SYSTEM
Make: Weatherford
Max flow: 345 gpm (1306 L/min)
Max pressure: 1200 psi (8.3 MPa) at 213 gpm (806.3 L/min)
OPTIONAL CRANE
Weight: 2600 lb (1179.3 kg)
Max reach: 26.3' (8 m)
Max lifting capacity:5950 lb (2698.9 kg)
Max lifting capacity at max reach: 2530 lb (1147.6 kg)
Rotation: 400°
Wireless remote:Yes
FEATURES
Breakout system: Open-top, dual clamp, 10.2" (25.9 cm) diameter opening
Drilling lights: Yes
Flow indicator: Yes
Cab: Yes
Strike alert:Yes
Remote lockout: Yes
DRILL PIPE
Thread type: NC50 DS [4.5" (11.4 cm) IF double shoulder]
Length: 20' (6.1 m)
Rod diameter: 5" (12.7 cm) at 19.5 lb/ft (29 kg/m)
Wall thickness: .362" (9.2 mm)
Joint inside diameter:3.5" (8.9 cm)
Joint outside diameter:6.63" (16.8 cm)
Weight per joint:540 lb (244.9 kg)
Min transport length: 37' (11.3 m)
Min transport width: 100" (254 cm)
Min transport height: 11.3' (3.4 m)
Weight: 74,000 lb (33,565.84 kg)
ENGINE
Make/Model: CAT C13 ACERT Tier 4 Final
Fuel type: Ultra-low sulfur diesel
Max engine rpm: 2150 rpm
Gross horsepower: 415 hp (309 kW)
Cooling method: Liquid
Aspiration: Turbocharged and after-cooled
Emissions rating: Tier 4 Final (EU Stage IV)
OPERATIONAL
Thrust/Pullback: 242,100 lb (1076.9 kN)
Max carriage speed at max engine rpm: 120 fpm (36.6 m/min)
Max spindle torque (low at max engine rpm): 30,750 ft-lb (41,691.4 Nm)
Max spindle speed at max engine rpm: 164 rpm
Max ground drive speed at max engine rpm: 1.8 mph (2.9 km/h)
Noise level at operator’s ear: 85 dB(A)
Drill rack angle: 10°-17° (17.6%-30.6%)
FLUID CAPACITIES
Fuel tank: 134 gal (507.2 L)
Hydraulic tank: 166 gal (628.4 L)
DRILLING FLUID SYSTEM
Make: Weatherford
Max flow: 345 gpm (1306 L/min)
Max pressure: 1200 psi (8.3 MPa) at 213 gpm (806.3 L/min)
OPTIONAL CRANE
Weight: 2600 lb (1179.3 kg)
Max reach: 26.3' (8 m)
Max lifting capacity:5950 lb (2698.9 kg)
Max lifting capacity at max reach: 2530 lb (1147.6 kg)
Rotation: 400°
Wireless remote:Yes
FEATURES
Breakout system: Open-top, dual clamp, 10.2" (25.9 cm) diameter opening
Drilling lights: Yes
Flow indicator: Yes
Cab: Yes
Strike alert:Yes
Remote lockout: Yes
DRILL PIPE
Thread type: NC50 DS [4.5" (11.4 cm) IF double shoulder]
Length: 20' (6.1 m)
Rod diameter: 5" (12.7 cm) at 19.5 lb/ft (29 kg/m)
Wall thickness: .362" (9.2 mm)
Joint inside diameter:3.5" (8.9 cm)
Joint outside diameter:6.63" (16.8 cm)
Weight per joint:540 lb (244.9 kg)
Dës Informatioun gëtt nëmmen fir informell Zwecker zur Verfügung gestellt. HDD Broker LLC kann net garantéieren d'Genauegkeet oder Vollständegkeet vun dësen Informatiounen. Dës Informatioun kann mam Wënzer änneren. Verschidde Spezifikatioune kënnen tëschent dem Modelljoer variéieren.