Dës Säit gouf iwwersat iwwer Google iwwersetzt

Ausrüstungspezifikatioun Bibliothéik

Basismodell Informatiounen

  • Fabrikant:
    Case
  • Modell:
    960

dem Produzenten kucken Modellen kucken

Zousätzlech Informatioun

DIMENSIONS
Overall height – prime mover (to top of muffler): 115.7" (2.93 m)
Overall length – prime mover: 128.3" (3.28 m)
Overall transport length with backhoe and trencher with 4' (1.22 m) boom: 275.0" (6.98 m)
Angle of approach – prime mover: 58°
Angle of departure – prime mover: 60°
Minimum ground clearance – (axle to ground): 12.4" (315 mm)
Minimum ground clearance with backfill blade: 11.2" (284 mm)
Wheelbase: 76.8" (1.95 m)
Height to centerline of trencher headshaft: 29.8" (756 mm)
Angle of departure with trencher attachment: 34°
Trencher boom angle down from horizontal: 65°
Trencher boom angle up from horizontal: 50°
Backhoe transport height: 117.2" (2.97 m)
Backfill blade height: 16.1" (410 mm)
Backfill blade lift height: 19.1" (484 mm)
Backfill blade depth of cut below grade: 3.1" (78 mm)
Transport height, plow frame base tractor: 91.5" (2.32 m)
Center of rear wheel to rear of plow with chute in ground: 114.1" (2.90 m)
Plow swing angle: 25°
Plow offset from centerline: 32" (813 mm)
Angle of departure base tractor/plow attachment raised:
with 30" (762 mm) mounted blade: 26°
without mounted blade: 30°
Plow blade tip ground clearance base tractor:
with 30" (762 mm) mounted blade: 28.4" (721 mm)
Overall width base tractor: 85.8" (2.18 m)
Overall width with optional tires: 85.8" (2.18 m)
Tread width (centerlines) base tractor: 68.1" (1.73 m)
Turning radius (outside) base tractor – 4-wheel steer: Left – 129" (3.27 m)
Right – 129" (3.27 m)
Operating weight:12,700 lb (5760 kg)

ENGINE
Model: Case 4T-390
Type: 4-stroke, turbocharged
Cylinders: 4
Bore/Stroke: 4.02" x 4.72" (102 x 120 mm)
Displacement: 239 in3 (3.9 L)
Fuel injection: Direct
Fuel: Diesel
Fuel filter: In-line strainer and spin-on cartridge
Air intake: Cross-flow
Cooling: Liquid
Horsepower
Gross: 99 (74 kW) @ 2200 rpm
Net: 91 (68 kW) @ 2200 rpm
Maximum torque Gross: 298 lb·ft (404 N·m) @ 1500 rpm

ENGINE COOLING
Radiator
Core size area: 415 in2 (.268 m2)
Rows of tubes: 5
Fan w/standard transmission
Style: 7 blade suction
Diameter: 20.4" (518 mm)
Ratio: 1.1:1
Water pump Style: Integral
Engine oil
Pump: Deep sump plate cooler with pressurized nozzles under-piston
Pump operating angle ratings
Side-to-side: Rated 45°
Fore and aft: Rated 45°
Oil filtration: Replaceable, full-flow cartridge

POWERTRAIN
Transmission: 4-speed Hydra-shift with constant gear mesh
Drive: Hydrostatic 4WD variable displacement axial-piston pump 0 – 46.5 gpm (0-176 L/min)
U-joints: Constant velocity
Axle ratio: 19.2:1
Planetaries: 6:1 – Outboard
Differentials: Electrically actuated
Steering: 2W, 4W and crab
Axle oscillation: 20°
Service brakes: Hydrostatic
Parking brake: Internal, SAHR multi-disc
Travel speeds
1st: 1.4 mph (2.2 km/h)
2nd: 2.9 mph (4.7 km/h)
3rd: 5.0 mph (8.1 km/h)
4th: 10.5 mph (16.8 km/h)

TIRES
38 x 18.00-20, 10 PR
38 x 18.00-20, 12 PR (heavy-duty)

SERVICE CAPACITIES
Fuel tank: 25 gal (95 L)
Cooling system: 18.2 qt (17.2 L)
Engine with oil filter: 11.6 qt (11 L)
Hydraulic reservoir: 20 gal (75.7 L)
Total hydraulic: 22 gal (83.3 L)
Transmission: 9 qt (8.5 L)
Axle center (each): 9.5 qt (9 L)
Planetaries (each): 1.1 qt (1 L)
Trencher planetary drive: 1.5 qt (1.4 L)
Hydra-Borer System: 1.0 qt (0.9 L)

HYDRAULICS
Ground drive pump: 46.5 gpm (176 L/min)
Attachment drive pump: 46.5 gpm (176 L/min)
Steering pump: 7.1 gpm (27 L/min)
Accessory pump: 11.4 gpm (43.3 L/min)
Filtration: Full-flow spin-on cartridges
Accessory return: 2 micron
Charge pump flow (2): 2 micron

ELECTRICAL SYSTEM
Voltage: 12 volts, negative ground
Alternator: 65 amp
Starter: 3.35 hp (2.5 kW)
Battery: 685 CCA@ 0°F (-17.7° C)

OPERATOR ENVIRONMENT
ROPS
Left and right entry/exit
Unobstructed operator platform
Swivel seat with seat belt
Key start
Hand and foot controls
Iso-mounted platform

INSTRUMENTATION
Engine coolant temperature gauge
Hydraulic oil temperature gauge
Fuel level indicator
Voltage meter
Engine oil pressure indicator
Tachometer/Hour meter
Hydraulic charge filter indicator
Hydraulic filter indicator
Air filter restriction indicator
Neutral indicator
Alternator light

ATTACHMENTS

TRENCHER
Dig depth: to 84.0" (2.13 m)
Digging width : 7.0" to 18.0" (178 to 458 mm)
Chain line speed: 670 ft/min (204 m/min)
Chain tensile strength: 110,000 lb, 150,000 lb, 165,000 lb, and 225,000 lb
Drive: Hydrostatic/Reversible
Boom angle from horizontal: Up 50°, Down 65°
Angle of departure: 34°

6-WAY BACKFILL BLADE
Width: 80.7" (2.05 m)
Height: 16.1" (408 mm)
Lift clearance: 19.1" (485 mm)
Angle of approach: 20°
Ground clearance: 11.2" (284 mm)
Depth of cut: 3.1" (78 mm)
Offset outside of tire: 8.5" (215 mm)
Angle left or right: 34.5°
Blade tilt - left or right: 12°

P95 VIBRATORY PLOW
Vibration: Counter-rotating weights
Frequency – maximum: 2,000 vpm
Drive:Hydroststic
Blade steer angle: 30°
Plow off centerline: 32" (813 mm)
Minimum turning radius @ blade: 18.0" (457 mm)
Angle of depression: 14°
Weight (no blade): 2,006 lb (909 kg)

REEL CARRIER
Maximim reel width: 56.0" (1.42 m)
Maximum reel diameter
with backfill blade: 60.0" (1.52 m)
without backfill blade: 80.0" (2.03 m)
Angle of approach without backfill blade
with 5' (1524 mm) reel: 26°
with 6' 8" (2032 mm) reel: 20°
Center of reel – hydraulic lift
Pickup height: 11.9" (302 mm)
Maximum height: 59.5" (1511 mm)
Reelshaft diameter: 2.38" (60 mm)
Capacity: 2,500 lb (1134 kg)

QUAD ATTACHMENT
Offset from centerline of machine to center of:
Plow right: 18.5" (470 mm)
Plow left: 15.6" (396 mm)
Trencher right: 26.5" (673 mm)
Trencher left: 15.6" (396 mm)
Weight: 16,000 lb (7257 kg)

HYDRA-BORER
Drive: Hydraulic
Torque: 423 lb·ft (574 N·m)
Rotation: Bi-directional
Rod length: 10'0" (2.54 m)
Drive shaft height: 35.4" (899 mm)
Maximum rpm: 307

ROCKWHEEL
Cutting widths: 3.0" (76 mm), 4.0" (102 mm), 5.0" (127 mm)
or 6.0" (152 mm)
Cuting depths up to: 30.0" (762 mm), 36.0" (914 mm) or 40.0" (1016 mm)
Teeth: Replaceable carbide tips
Drive: Hydrostatic
Lift: Hydraulic

762 BACKHOE
Digging depth – maximum: 111.6" (2.83 m)
Digging depth – 2' (610 mm) flat bottom: 109.8" (2.79 m)
Digging depth – 8' (2438 mm) flat bottom: 95.4" (2.42 m)
Bucket digging force: 7,179 lbf (31 934 N)
Dipper digging force: 4,180 lbf (18 594 N)
Loading height: 105.5" (2.68 m)
Reach from swing pivot: 163.4" (4.15 m)
Bucket rotation: 160°
Swing arc: 180°
Operating height – fully raised: 192.8" (4.89 m)
Transport height: 117.2" (2.97 m)
Stabilizer spread - Working: 99.1" (2.52 m), Transport: 78.7" (2.0 m)
Leveling angle: 3°
Backhoe weight without bucket: 2,232 lb (1012 kg)

Dës Informatioun gëtt nëmmen fir informell Zwecker zur Verfügung gestellt. HDD Broker LLC kann net garantéieren d'Genauegkeet oder Vollständegkeet vun dësen Informatiounen. Dës Informatioun kann mam Wënzer änneren. Verschidde Spezifikatioune kënnen tëschent dem Modelljoer variéieren.

HDD Broker benotzt Cookien an sammelt perséinlech Informatioune fir seng Websäiten.

Fir méi ze léieren, préifen d'HDD Broker d'Privatsphärpolitik an d'Cookie-Politik. Wann Dir op "I Accept" klickt, kënnt Dir uginn datt Dir Är Browserinstellungen ugepasst hutt fir Är Präferenzen anzestellen an d'Cookie vum HDD Broker ze benotzen.

x