Zoumaachen

• Fabrikant:
  Vermeer
• Modell:
  D24x40 S3
• Ausrüstung Gréisst:
  20,001 - 30,000 lbs pullback

WEIGHTS AND DIMENSIONS
Min transport length: 20.1' (6.1 m)
Min transport width: 89" (226.1 cm)
Width (With Cab, Minimum Transport): 89" (226.1 cm)
Min transport height: 76" (193 cm)
Height (with cab): 102" (259.1 cm)
Height (With Cab): 117" (297.2 cm)
Height (Minimum Transport): 76" (193 cm)
Min weight: 20,700 lb (9389.3 kg)
Max weight: 22,250 lb (10092.4 kg)

ENGINE OPTION ONE
Make and model: John Deere 4045
Fuel type: Ultra low sulfur diesel
Max engine rpm: 2400 rpm
Idle Speed: 1150 rpm
Gross horsepower: 125 hp (93 kW)
Displacement: 275 cu in (4.5 L)
Cooling method: Liquid
Aspiration: Turbo
Max Fuel Consumption: 6.8 gph (25.7 Iph)
Air Cleaner: Donaldson
Emissions rating: Tier 4 Final (EU Stage IV)
Maximum Operating Angle (Fore/Aft)*: 30
Maximum Operating Angle (Left/Right)*: 25/25

ENGINE OPTION TWO
Make and model: John Deere 4045
Fuel type: Diesel
Max engine rpm: 2400 rpm
Idle Speed: 1150 rpm
Gross horsepower: 125 hp (93 kW)
Displacement: 275 cu in (4.5 L)
Cooling method: Liquid
Aspiration: Turbo
Max Fuel Consumption: 6.8 gph (25.7 Iph)
Air Cleaner: Donaldson
Emissions rating: Tier 3 (EU Stage IIIA)
Maximum Operating Angle (Left/Right)*: 30 deg

OPERATIONAL
Thrust/Pullback: 28,000 lb (124.6 kN)
Max carriage speed at max engine rpm: 240 fpm (73.2 m/min)
Maximum Carriage Speed in Low at Maximum Engine RPM: 101 ft/min (30.8 m/min)
Max spindle torque (low at max engine rpm): 4200 ft-lb (5694.4 Nm)
Maximum Spindle Torque (Medium at Maximum Engine RPM): 3500 ft-lb (4745.4 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 2000 ft-lb (2711.6 Nm)
Max spindle speed at max engine rpm: 270 rpm
Min bore diameter: 4" (10.2 cm)
Max ground drive speed at max engine rpm (fwd): 3.3 mph (5.3 km/h)
Noise level at operator's ear: 82.9 dB(A)
Noise level at operator's ear (cab): 75.7 dB(A)
Drill rack angle: 14-21° (24.9–38.4%)

DRILL PIPE
Type: Firestick drill rod
Length: 10' (3 m)
Rod diameter: 2.38" (6 cm)
Weight: 73 lb (33.1 kg)
Bend radius: 108.2' (33 m)

FEATURES
Breakout system: Standard hydraulic vise
Drilling lights: Standard
Flow indicator: Standard
Stakedown system: Standard
Cab: Optional
Strike alert: Standard
Remote lockout: Standard

FLUID CAPACITIES
Fuel tank: 44 gal (166.6 L)
Antifreeze tank capacity: 3.9 gal (14.7 L)
Antifreeze Tank Capacity: 1.6 gal (6.1 L)
Engine Crankcase with Filter: 15.5 qt (14.7 L)
Hydraulic Tank: 55 gal (208.2 L)
Hydraulic System: 65 gal (246.1 L)
Engine Cooling System: 20 qt (18.9 L)

HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 9 gpm
Auxiliary Pump Relief Pressure: 3000 psi (206.8 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 32 gpm (121.1 L/min)
Thrust/Pullback Pump Relief Pressure: 5500 psi (379.2 bar)
Rotation Pump Flow at Maximum Engine RPM: 45 gpm (170.3 L/min)
Rotation Pump Relief Pressure: 6000 psi (413.7 bar)
Hydraulic Supply Filter Rating: 9 micron
Hydraulic Return Filter Rating: Dual 5 micron filters

DRILLING FLUID SYSTEM
Max flow: 50 gpm (189.3 L/min)
Max pressure: 1050 psi (7.2 MPa)
Brand: Aplex
On Board Tank Capacity: 6 gal (22.7 L)