Diese Seite wurde mit Google Übersetzer übersetzt

Gerätespezifikationsbibliothek

Grundlegende Modellinformationen

  • Hersteller:
    Vermeer
  • Modell:
    D20x22
  • Rig Größe:
    10,001 - 20,000 lbs pullback

Hersteller anzeigen Modelle anzeigen

Spezifikationen

Rod Carrying Capacity 360 ft 109.7 m
Max Speed 2544 rpm 63.38 kw
Max Pressure 750 psi 51.71 bar
Weight 59 lbs 26.8 kg
Length 205 in 521 cm
Max Carriage Speed @ max engine RPM: 150 ft/min 45.7 m/min
Fluid Tank On Board Tank Capacity: 60 gal On Board Tank Capacity: 227.12 L
Min Bend Radius 101.9 ft 31.1 m
Rod Loader Automated Rod Loader: Yes - standard
Pipe Diameter 2.06 in 5.2 cm
Height 90 in 229 cm
Ground Drive Speed @ max engine RPM: 2.5 mph 4.02 km/h
Weight with 400 ft. rod: 11,160lbs 5062.09 kg
Max Flow 25 gpm 94.6 Lpm
Thrust (actual): 20,000 lb 9072 kg
Entry Angle 12-16 deg
Fuel Tank Capacity 25 gal 94.64 L
Make and Model Cat 3054
Hydraulic Tank Capacity 23.5 gal 88.96 L
Manufacturer's Gross HP Rating 85 hp
Type Firestick I
Max Spindle Torque 2200 ft-lb 2982.8 Nm
Length 10 ft 3 m
Pullback 20,000 lbs 9,071.8 kg
Max Spindle Speed @ max engine RPM: 200 rpm
Joint Diameter 2.125 in 5.4 cm
Width (fixed tracks): 48 in (Fixed tracks)122 cm
Min Bore Diameter 3.5ft 9 cm

Zusätzliche Information

DIMENSIONAL
Maximum Length: 205" (521 cm)
Height: 90" (229 cm)
Width (fixed tracks): 48" (122 cm)
Weight with 400 ft. rod: 11,160lbs (5062.09 kg)

ENGINE
Make and Model: Cat 3054
Maximum Engine RPM: 2544 rpm
HP Gross: 85 hp (63.38 kw)
HP Net: 78 hp (58.16 kw)

OPERATIONAL
Max. Spindle Torque in Low @ max engine RPM: 2,200 ft-lb (2,982.8 Nm)
Max. Spindle Torque in High @ max engine RPM: 1,400 ft-lb (1,898.15 Nm)
Pullback: 20,000 lbs (9,071.8 kg)
Maximum Spindle Speed @ max engine RPM: 200 rpm
Minimum Bore Diameter: 3.5" (9 cm)
Maximum Ground Drive Speed @ max engine RPM: 2.5 mph (4.02 km/h)
Maximum Carriage Speed @ max engine RPM: 150 ft/min (45.7 m/min)
Drill Rack Angle: 12-16 deg
Automated Rod Loader: Yes - standard
Maximum Spindle Torque: 2200 ft-lb (2982.8 Nm)

FLUID CAPACITIES
Fuel Tank: 25 gal (94.64 L)
Engine crankcase with Filter: 9 qt (9 L)
Hydraulic Tank: 23.5 gal (88.96 L)

DILLING FLUID SYSTEM
Maximum Flow: 25 gpm (94.6 Lpm)
Maximum Pressure: 750 psi (51.71 bar)
On Board Tank Capacity: 60 gal (227.12 L)

DRILL PIPE
Type: Firestick I
Length: 10' (3 m)
Joint Diameter: 2.125" (5.4 cm)
Pipe Diameter: 2.06" (5.2 cm)
Weight: 59 lbs (26.8 kg)
Minimum Bend Radius: 101.9' (31.1 m)
Rod Carrying Capacity: 360' (109.7 m)

FEATURES
Breakout System: Hydraulic Vise
Stationary Stakedown System: 4 or 6" (10 or 15 cm)

FEATURES AND BENEFITS
Feature: Compact Size
Benefit: The D20x22 is the only drill on the market that provides 85 hp (63 Kw) in a 48-inch (122 cm) wide machine. Its small size allows it to be used in congested areas where other machines cannot be used. The D20x22 can be trailered side by side with the MX125 drilling fluid system, allowing the use of smaller support equipment.

Feature: Rack and pinion thrust drive
Benefit: The narrow rack and pinion thrust drive design utilizes replaceable gear track sections. If damage occurs to a track section, an operator unbolts the section and replaces it. Some competing manufacturers weld the gear track to the rack.

Feature: Two-Speed Rotational Operations
Benefit: The two-speed rotational operations allow the operator to choose a high RPM to do the pilot bore, and then select a high torque for the pullback.

Feature: 60-Gallon (227 L) On-Board Water Tank
Benefit: A 60-gallon (227 L) on-board water tank provides clean water supply for easy clean-up and can supply ample drilling fluid for smaller jobs.

Feature: 2200 ft-lb (2983 Nm) of torque
Benefit: With 2200 ft-lb (2983 Nm) of torque, the D20x22 has enough power to turn cutting tools in demanding soil conditions and longer distance bores. The D20x22 has enough torque to accomodate larger backreamers than other machines in this HDD class.

Feature: Pullback
Benefit: The D20x22 has 20,000 lb (9072 kg) of pullback for longer, heavier product.

Feature: Operator's Station
Benefit: Elevated operator's station with swing-open design offers the operator comfort and a clear forward view of the drilling operation. Thrust/pullback, rotation and water-pressure gauges are conveniently located to the right side of the operator for simple reference during boring operations. Operator's presence switch located in the operator's seat stops thrust/pullback and rotational functions when the operator leaves the seat. The strike alert system located at the operator's station warns the operator of an electrical strike.

Feature: Simplified Electrical System
Benefit: By implementing a CAN Bus electrical system, approximately 20 percent of the wiring is eliminated. CAN Bus systems have been used for years in the airline industry and on construction equipment, such as excavators.

Hersteller anzeigen Modelle anzeigen

Diese Information dient nur zu Informationszwecken. HDD Broker LLC kann die Richtigkeit oder Vollständigkeit dieser Informationen nicht garantieren. Diese Informationen können vom Hersteller geändert werden. Einige Spezifikationen können sich je nach Modelljahr unterscheiden.

HDD Broker verwendet Cookies und sammelt persönliche Informationen auf seinen Websites.

Weitere Informationen finden Sie in den Datenschutzbestimmungen und Cookie-Richtlinien von HDD Broker. Durch Klicken auf "Ich stimme zu" geben Sie an, dass Sie Ihre Browsereinstellungen an Ihre Präferenzen angepasst haben und der Verwendung von Cookies durch HDD Broker zustimmen.

x